Now 250A socket as an industrial socket in the application has been very wide, but do you know? The parameters of this product must be applied properly in order to achieve stable and safe results. IP54 is dustproof level 5: can not completely prevent dust invasion, but the amount of dust invasion will not affect the normal operation of the product; Waterproof grade is 4: prevent splashing water intrusion prevent splashing water intrusion in all directions. CEE connectors CEE standard industrial plug receptors. they are explosion-proof receptors. the temperature is limited to 32 degrees. NEMA wiring device to achieve frequent reversing but also to achieve braking and acceleration after reversing motion must be as small as possible, which requires rapid reversing device and braking device.

Below I will explain for you about 250A socket in the application of the two parameters to consider, I hope you can read, when using this product, to pay special attention to these aspects.

The first point: electrical parameters

When using a 250A socket, there are certain requirements for electrical parameters, mainly the rated current and voltage, which must match the ambient current. In addition, the resistance must meet the requirements to ensure the stability of the use.

Second point: safety parameters

250A socket in the development of application research needs to consider absolute safety, but in the socket safety management parameters of the determinants of the impact of the problem is very many, mainly can be divided into the following aspects.

Environment parameters: the environment of 250A socket. Although the industrial socket can be applied to some harsh environmental factors, but some too harsh environment can not be used for a long time, but it will still cause a certain reduction in the service life of the product.

Connection parameters: when selecting 250A socket applications, the end mode of the product must be considered, including welding, crimping, lead bonding and other connection modes, and the appropriate end mode should be selected. To ensure the safety of product application.

Product material parameters: of course, the most important problem is the production of 250 socket material, high current socket material selection must have a certain flame retardant, resistance to pressure, and internal insulation part also has relatively high insulation resistance, this kind of product is more reliable in safety.

These are the two parameters to be considered when applying the 250A socket provided by the adjuster. I hope it will be helpful for you to apply this product in the future.