Note: The cable on the industrial plug also adopts the unique rubber sheathed cable, that is, the cable is covered with vulcanized rubber and vulcanized rubber sheath. CEE connector CEE standard industrial plug socket is an explosion-proof socket, and the temperature is limited below 32 degrees. IP54, that is, dust prevention is level 5: dust intrusion cannot be completely prevented, but the amount of dust intrusion will not affect the normal operation of the product; Waterproof grade 4: prevent splashing water from invading, and prevent splashing water from all directions from invading. The power socket has one or more seats into which circuit wiring can be inserted, through which various wiring can be inserted to facilitate connection with other circuits.General industrial plug housings are mostly pc raw materials, which have the characteristics of high temperature resistance and are suitable for general individual users. However, because of the uniqueness of the mobile socket, it should be used in high-power power switching power supply, so its fire resistance provides higher safety. Therefore, the socket control board in Wolff household appliances has high utilization rate and high flame retardant pc polycarbonate aluminum alloy, which has impact resistance, ductility, toughness, drop resistance, flame retardant and fire safety, and can be used in the middle of -60-120 degrees without deformation after long-term use, thus reasonably prolonging the socket life.Industrial plug installation and wiring:1) Select the appropriate model and specification according to the load current, installation method and application place.2) Remove the package and the power plug and socket.3) Open the back cover, remove the four shell fixing screws with a cross screwdriver, remove the shell, remove the fixing screws from the clamp, remove the straight hairpin and screw the lower end cover.4) Excellent straight hair splint, cable fixing, cover shell and four fixing screws of the shell are firmly fixed, and the end cover is fastened.Frequently asked questions about industrial plugs:1) The application site of industrial plugs and sockets should be free from corrosion, flammable and explosive vapors of easy olefins and conductive floating dust.2) Prevent strong impact, vibration and extrusion molding.3) The load current must not exceed the rated current of the power plug and socket.4) The terminal screw connecting the socket terminal and the cable must be tightened, otherwise poor grounding will cause thermal damage to the socket.5) Never use power cord connector plug (such as socket) instead of power plug.6) The industrial plug or RF connector should be off-line when it is not needed, so as to avoid environmental pollution or moisture regain when it falls on the road surface.